Takamaz has created client-oriented products on the last 50 years producing machine-tools that give “utility generation machines”. In modern times with everything evolving at an amazing rhythm, we believe that we can satisfy our clients necessities with our flexible imagination, tireless and daring spirit and confidence on our tech know-how.
The standard spindle motor output is 11/7.5kW (X-150PLUS: 7.5/5.5kW). As an option, 15/11kW is available and with this increase in capacity, 60% increase in cross-sectional area processing capacity is achieved. In addition, the spindle through diameter of φ65 is available as an option. With this option, larger diameter bar material can be cut. A 8” Chuck is the standard option with this model.
Maximum turning diameter with a 6-inch chuck is φ180mm. With the machine’s compactness in design taking up only 1,610mm x 1,250mm of floor space, installation is not a problem.
Through ergonomic design, the machine operational panel has been installed at an optimal height. This makes the monitor easier to see from a comfortable posture. Buttons that are used in high frequency are easy to press and positioned on the right side.
The unique 1-spindle 2-turret and servo-controlled tailstock configuration dramatically improves shaft work productivity. The X-axis stroke is set to max. 115 mm. Crankshafts up to 700 mm long can also be handled.
The cycle time is shortened by balance cutting with symmetrical twin turrets, and simultaneous left/right individual machining. Added to that, adoption of a 10-station turret gives leeway in the tool layout.
Due to the turret and slide structure, the width of the machine with the loader transfer has been cut to 1,595 mm, the smallest in the class. (25% smaller than existing models) This reduces the workpiece transfer distance from the machine to peripheral devices, allowing the width of the production line to be reduced.
A 7.5/5.5 kW spindle motor is installed, and the increased power reduces spindle acceleration/deceleration times.
Chuck size, 6”.
This new 3-axis loader is even faster with a loading time of 6 sec.This machine is equipped with high speed shutter,reducing shutter open/close time into half(with open/close <0.5 sec).
The adoption of the box sliding for the slide,φ100mm maximum spindle diameter and 11/7.5kW moter, makes this one machine the most productive of its class.
With a large diameter spindle of 120mm combined with an 18.5/15kW motor, cutting capacity is 1.8 times than that of our previous models. The machine is capable of heavy cutting with high torque even at low speeds needed for cutting of large-diameter flange-like work.
A spindle cooling mechanism is built into the unit to minimize geometric change due from heat.